Skip to content

Warranty & care

6-year limited warranty.

All R-TEK Armour Paint Protection Film products are backed by a 6-Year Limited Warranty, reflecting our commitment to long-term performance and reliability.

R-TEK Armour guarantees that its Paint Protection Film will remain free from the following defects under normal use and conditions:

What's covered

  • Yellowing or discolouration
  • Cracking or surface degradation
  • Peeling or delamination
  • Blistering or bubbling
  • Non-chemical staining
  • Film failure due to manufacturing defects

This warranty is valid only for the original purchaser and applies exclusively to the vehicle and installation detailed on the original invoice.

Not covered

  • Improper installation by non-authorised installers
  • Accidents, collisions or impact-related damage
  • Misuse, negligence or improper handling
  • Cuts, burns, tears or damage from sharp objects
  • Pre-existing paint defects, repainting or paint failure
  • Incorrect maintenance, including improper washing, polishing or harsh chemicals
  • Environmental contaminants such as tree sap, bird droppings, acid rain, road tar or industrial fallout
  • Surface contamination due to poor maintenance practices
  • Normal wear and tear over time
  • Any modification, tampering or removal by unauthorised parties
  • Failure to follow R-TEK Armour care and maintenance guidelines

Eligibility

  • Installation must be completed by an authorised R-TEK Armour installer
  • The vehicle’s paint must be in suitable condition prior to application
  • The original purchase invoice must be retained as proof of warranty

Limitations

  • This warranty covers film replacement only
  • It does not include repainting or repair of underlying surfaces
  • R-TEK Armour is not liable for any loss of use, transportation costs or downtime
  • The warranty is non-transferable

Film removal

All film removal must be carried out by an authorised R-TEK Armour installer. Any damage caused during removal by unauthorised individuals is not covered under this warranty.

By purchasing and/or installing R-TEK Armour Paint Protection Film, you acknowledge and agree to these Warranty Terms & Conditions.

Care guidelines

Maintaining your R-TEK Armour Paint Protection Film is simple. Follow these guidelines to preserve long-lasting clarity, performance and a flawless finish.

  1. 01

    Always follow the maintenance schedule recommended by your installer for optimal results.

  2. 02

    After installation, allow 7 days before washing, waxing, or exposing the vehicle to rain or high-speed driving, ensuring optimal film adhesion.

  3. 03

    When using a pressure washer, keep a minimum distance of 60 cm (2 ft) from all film edges. Damage caused by improper use is not covered under warranty.

  4. 04

    Keep your vehicle consistently clean — wash at least once every two weeks, and promptly after exposure to rain or contaminants.

  5. 05

    Avoid dry wiping or dusting, as this may compromise the film’s self-healing properties and surface finish.

  6. 06

    Periodically clean any build-up along film edges using a non-abrasive clay bar.

  7. 07

    Apply a high-quality wax or sealant (approved by your installer) every 3 months to maintain gloss and protection.

  8. 08

    Use only non-abrasive, dye-free waxes. Avoid harsh polishing compounds or abrasive products.

  9. 09

    Do not use automatic or commercial car washes, as they may damage the film edges and surface.

  10. 10

    After waxing, gently remove any residue along edges using a soft, lint-free cloth.

  11. 11

    If the film appears dull due to environmental exposure, professional polishing can restore its finish. Consult an authorised R-TEK Armour installer.